Pure titanium bowl
The pure titanium bowl is a deep serving format specified with a 2,000 ml nominal capacity and a 0.5 mm TA1 titanium body. Its rounded profile suits shared dishes, fruit, salads and other table service where a roomy vessel is useful. These are product specification declarations supplied for this item, not laboratory-verified measurements or performance results.
The product image shows four color appearances over an ice-crystal texture. It also highlights an apparently continuous body, a rounded rim and a base shaped with stability in mind. Visual details and the final configuration should be checked against a physical sample. Buyers can compare related forms in our Pure Titanium Tableware category.
1. Pure titanium bowl specifications
| Declared specification | Product sheet value | Buyer note |
|---|---|---|
| Nominal capacity | 2,000 ml | Confirm the useful fill level on the approved sample. |
| Body thickness | 0.5 mm | Confirm production tolerances for the ordered version. |
| Body material | TA1 pure titanium | Request batch documentation if your project requires it. |
| Packing quantity | 24 pieces | A declared packing figure, not a minimum order quantity or a confirmed carton count. |
The values above come from the supplied product sheet. They identify the offered format for discussion and sample approval; they do not replace measurement of a production-representative unit or project-specific documents.
2. TA1 pure titanium body
TA1 pure titanium is the stated body material. For a buyer, that declaration is a starting point for material review, not proof that every surface detail or proposed use has been independently tested. Ask which material documents match the finished bowl and the production batch being considered. The 0.5 mm body specification helps define the intended format, but any practical feel, rigidity and finish should be judged on a sample.
If titanium terminology is new to your team, our guide to titanium cookware terminology explains why the named metal, the product construction and the intended use should be considered separately.
3. One-piece body, rounded rim and base design
The source image describes a one-piece, seamless body. On the pictured bowl, the side wall flows into the base without an obvious joined seam. This is a design description rather than verification of the forming process. A buyer who needs a specific manufacturing method should ask for process details and inspect a representative unit, including the inside transition and the underside.
A rounded rim is intended to make handling and serving more comfortable. The shaped base is intended to support stable placement on a level table. Actual steadiness depends on the surface, the bowl's loading and the final base geometry, so a sample should be tested in its intended setting. Neither feature is a guarantee against tipping or sliding.
4. Four pictured finishes
The central product photos show red or copper-toned, blue, gold-toned and silver-toned appearances. An ice-crystal texture is visible across the pictured surfaces. These are descriptions of the image, not official finish names or a promise that every appearance is currently available. Lighting, screen settings and production variation can affect how a finish looks.
Before selecting a variant, compare a physical sample with the desired appearance under the lighting where the bowl will be used. Confirm the finishing method, acceptable visual range and care instructions for the chosen version with the supplier. The image alone does not establish how the color or texture was produced.
5. Serving and routine cleaning
Use the bowl as tableware for serving food in a way that suits the approved sample. Metal can become hot when holding hot contents, so handle it with care and check the temperature before passing it to someone else. This serving bowl should not be assumed to be cookware. If a different heat-related use is planned, obtain product-specific instructions first.
For routine cleaning, wash with mild detergent and a soft sponge, then rinse and dry. Avoid harsh scrubbing until the finish-specific care guidance is confirmed, especially for the colored appearances. Ask whether the approved finish has any particular restrictions before adopting a cleaning procedure for a hospitality or retail program.
6. Sample approval and product inquiries
A physical approval sample can settle questions that a product image cannot: the useful fill level, rim feel, base contact, visible texture and color appearance. Record the accepted sample and clarify which specifications and tolerances will govern repeat production. If documentation is needed for a destination market, request documents that apply to the finished item and proposed use.
For sampling, production options and packing details, review our manufacturing capabilities and contact TITAUDOU. Specify your intended market, serving context and preferred pictured appearance so the team can confirm what can be supplied for that configuration. The listed 24 pieces should be checked against the actual packing proposal before any order is placed.
